 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DATASHEET Lighting Imaging Telecom Machine Vision Illumination Systems MVS-5000 Machine Vision Strobe Description The PerkinElmer MVS 5000 Machine Vision Strobe produces short duration, high intensity light pulses for industrial vision applications. When operated in conjunction with a CCD/CID solid state video camera, the unit front or backlights objects, freezes motion and eliminates blur, thus enhancing image quality. The MVS 5000 is a DC-powered unit. The linear xenon flashlamp is packaged in a metal enclosure with a fan for cooling. This strobe incorporates a reflector for maximum intensity and a diffuser window for even illumination of the target area. Input power and signal level cable connections are made through a 9-pin connector mounted on the back of the unit. Features * Compact * Light weight * 12 VDC input * Optically isolated trigger input * Long life xenon flashlamp * Flash rates to 30 Hz * Uniform illumination * Reduced EMI . www.perkinelmer.com/opto MVS-5000 Strobe Optical Specifications 300 to 1100+ nm Spectral bandwidth (1) 30 Hz maximum Flash rate >108 flashes Flashlamp life (3) Flash duration (2) 20 microseconds Flash to flash variation < 5% Illumination Characteristics Distance 1 foot 2 feet 3 feet Note 1: Note 2: Note 3: Note 4: Note 5: Area Illuminated 14.25 in. x 13 in. 29 in. x 28 in. 37.5 in. x 36.5 in. Photometric 60 lux-sec 16 lux-sec 7 lux-sec Radiometric 4.90 x 10-5 J/cm2 1.33 x 10-5 J/cm2 5.5 x 10-6 J/cm2 Spectral bandwidth may be extended into the ultraviolet with other enclosure window materials. Measured at 1/3 of peak value. Prior to light output decreasing to 50% of the initial value. Area where energy is not less than 50% of maximum. Variations available: MVS 5002: 2.9 J at 15 Hz max and MVS 5004: .75 J at 60 Hz max Electrical Specifications Input voltage Input current Flashlamp voltage Discharge capacitor Discharge energy Discharge power Tirgger input: (1) Trigger Pulse duration Note 1: 11-15 VDC 4.5 amps at 12 V (30Hz) 600 volts 8 microfarads 1.4 Joules 43 watts at 30 Hz +5 volt pulse into opto-isolator with 150 ohm nominal series resistor 10 to 100 microseconds Delay between flash command and light output is 8 microseconds typical Mechanical Specifications MVS 5000 2.50 (63.5) 4.13 (104.8) (30.2) 1.19 2.50 (63.5) 8.38 (212.7) 1.75 (44.5) 2.25 (37.2) 1/4-20 FOR MOUNTING (2 PLACES) DIMENSIONS ARE IN INCHES (MILLIMETERS) For more information e-mail us at opto@perkinelmer.com or visit our web site at www.perkinelmer.com/opto. All values are nominal; specifications subject to change without notice. USA: PerkinElmer Optoelectronics 35 Congress Street Salem, MA 01970 Toll Free: (800) 950-3441 (USA) Phone: (978) 745-3200 Fax: (978) 745-0894 (c) 2001 PerkinElmer inc. All rights reserved. 2.06 (52.3) Europe: PerkinElmer Optoelectronics Wenzel-Jaksch-Str. 31, D-65199 Weisbaden, Germany Phone: +49 (0) 611-492-437 Fax: +49 (0)611-492-159 Asia: PerkinElmer Optoelectronics 47 Ayer Rajah Crescent #06-12 Singapore 139947 Phone: +65 775 2022 Fax: +65 775 1008 . 0601 www.perkinelmer.com/opto |
Price & Availability of MVS-5000
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |